PoliFilling®55-S, is a cement based, silicon reinforced grouting material decorative for ceramic, tile, marble and granite interlines which is not effected by water and which is resistant against vibrations, elongations and contractions due to temperature changes.
Fields of Application
-Indoor spaces, in vertical and horizontal applications,
-In filling the grouting holes of ceramics, tiles, marble and granite adhered on existing surfaces.
-Shopping centers,
-On commercial and industrial floors. In hotels,
-In hospitals,
-In wet spaces,
-In domiciles
Features and Benefits
-Prepared and applied easily
-Does not scratch silvered surfaces.
-It is suitable for grouting holes with the widths 2 – 8 mm.
-Provides excellent adhesion to the edges of tiles without cracking.
-Has a long machinability duration. Smooth surfaces are obtained.
-Since it has little water absorbance it hardly gets dirty and can be cleaned easily.
-Freeze-thaw cycle resistant.
-Resistant to impacts, vibrations and detergents. In the standard colors.
Application Procedure
Preparation of Substrate
Before filling ceramics and tile grouting holes, it must be waited for the used adhesive to achieve sufficient hardness. Just before interlining materials are applied, the surface must be cleaned without being harmed and must be dampened with a wet sponge.
Mixing
Pour the amount of water indicated in the Mixing Ratios table into a clean mixing container with the assistance of a measuring cup. Add PoliFilling®55-S slowly while mixing with a mixer that has a revolving frequency of 400 – 600 rev/min for about 3 – 5 minutes until a homogeneous mixture without pellets is obtained. Set it aside for about 3 – 5 minutes and the material becomes ready to use after it is mixed again for 30 more seconds.
Reviews
There are no reviews yet.